| Contact Curtis for pricing 740-835-6600 | |
| Item | Description |
| A404 | |
| 32740 | Valve Body, A404/413/470 Non Lock-Up 1978-87 |
| A518 | |
| 22556AC | Drum, A518/A618/48RE Reverse (W/Press On Race) (14 Roller) 1990-Up (This Drum Is 6 1/4”OD At The Band Surface) (With 6 5/8”OD Shoulder) |
| 22555A | Drum, A727/A518 Direct (Front Clutch) (3 Clutch) 1971-Up |
| 22520CA | Stator, A727/A518/A618/48RE Lock-Up (1 1/4”ID Rear Bushing) 1994-Up (W/3 Check Balls) |
| 22740EC | Valve Body, A518/A618 (3 Solenoids & 1 Round Sensor) 4 Prong Governor Solenoid 1996-99 (Contains: S12741A-1, S12741M-1, S12741P-1, 12432A, & 12325C Already Installed)(Customer Must Use Their Own Park Rod Actuator) |
| CHR-A518-GS | A518 GUT STACK |
| 62TE | |
| CHR-62TE-GS | 62TE GUT STACK |
| 262715AA | 62TE DIFFERENTIAL ASSY (4X4)(79-T) |
| 262715A | Differential Assembly, 62TE (2WD)(79 Teeth)(12 Bolt)(23 Roller Bearing On Housing Side, 21 Roller Bearing On Ring Gear Side)(Has Only One Set Of Inner Splines On The Bell Housing Side) 2007-Up |
| 262500A | Pump, 62TE (6 Bolt Body To Case)(Stator Cast # 04659715) 2007-Up |
| 262555A | Drum, 62TE Direct Clutch (Aluminum)(6 Clutch)(2.230”Thick)(5.100”OD) 2007-Up |
| 262559A | Drum, 62TE Low Clutch Retainer (Aluminum)(3 Clutch)(8 Threaded Holes) 2007-Up (These Drums Have The Aluminum Ring Lands Cut Off & WE Replace With A Steel Sleeve With Ring Lands, With A Tighter Side Ring Clearance) |
| 262583A | Planet Kit, 62TE (3 Gear Front Planet)(Contains: #570, 578, 582, 594, 614, 584) 2007-Up |
| 262583AA | Planet Kit, 62TE (4 Gear Front Planet)(Contains: #570, 578, 582, 614, 584) 2007-Up |
| 262584A | Planet, 62TE Rear (5 Gear)(No Park Lugs)(With 48 Teeth Reluctor Instead) 2007-Up |
| 262740A | Valve Body, 62TE (Cast # On Case Side 5078705AA) 2007-Up |
| 262760A | Case, 62TE (2WD & 4×4)(Starter At 3:00)(Cast # 552AA)(Top Bolts Are 2 1/4”) 2007-Up |
| 262760AA | Case, 62TE (2WD & 4×4)(Starter At 3:00)(Cast # 505AA)(Top Bolts Are 3 3/8”) 2007-Up |
| 262991-4A | Manual Lever & Rod, 62TE (12 3/8”Long)(W/White Plastic Sleeve For Seal) 2007-Up |
| CHR-62TE-UDA | 62TE UNDERDRIVE ASSEMBLY (#’S 678, 555, 559) |
| 42RLE | |
| 82420A | Solenoid Pack, 42RLE Shift (4 Bolts To Valve Body) 2003-Up |
| 82500A | PUMP, Use 62520B & 92510A or 62520B & 92510 |
| 82584A | Planet, 42RLE Rear (5 Gear With .230” Thick Park Gear) 2003-Up |
| 82584AA | Planet, 42RLE Rear (5 Gear With .360” Thick Park Gear) 2003-Up |
| 82740AA | Valve Body, 42RLE (Without Solenoid Pack Or EPC Solenoid) (Uses 2 Case Connectors) 2006-Up |
| CHR-42RLE-GS | 42RLE GUT STACK |
| 45RFE | |
| 72420B | Solenoid Assembly, 45RFE/5-45RFE/68RFE (23 Prong White Connector) 2004-Up (This Will Fit 2011-Up With Grey Connector With Less Prongs)(This Is Updated)(For 1999-03 Sell D72991-3 Also) |
| 72740A | Valve Body, 45RFE W/Out Solenoids (Cast #04799655) 1999-Up |
| 72740B | |
| 72740C | Valve Body, 68RFE (Diesel)(Without Solenoids) 2007-Up (Cast # 04799591) |
| 72500A | Complete Pump, 45RFE (1st Design) (With S72507FK Already Installed)(Less Valves) (Uses A Front Seal In Body) (Can Use 72500AA or 72500AB) |
| 72500AC | Complete Pump, 45RFE/5-45RFE (4th Design)(With S72507FK Already Installed)(Less Valves) (Front Seal Is Not In The Body, It Is In The Front Cover Plate #519) |
| 72500C | Pump Complete, 68RFE (Body Cast # 52119617AA)(W/S72507FK Already Installed) 2007-Up |
| 722.6 | |
| 78510A | Pump Body W/Gears, 722.6 (5.980”OD)(.502” Thick Gears)(Cast Iron) 1996-Up |
| 78740AB | Valve Body, 722.6 (Mercedes) With 6 Solenoids (Cast # 05 06 Below The Manual Valve Stop) 1996-Up |
| 78740C | Valve Body, 722.6 (Chrysler) With 6 Solenoids (Cast # 52108216AA) 2004-Up |
| 845RE | |
| 319740A | Valve Body, 845RE (9 Solenoids)(Cast# A048 On Plate) 2012-Up |
| 319740 | Valve Body, 845RE |
| 339740C | 845RE VALVE BODY W/O TCM |
| CHR-845RE-GS | 845RE GUTSTACK |
| 948TE | |
| 339740B | Valve Body, ZF9HP48 (10 Solenoid)(Cast # 1094 427 079 On Transmission Side & 1094 427 080 On Pan Side) 2013-Up |
| A604 | |
| 92420 | Solenoid Pack, A604 (Shift Control) 1989-98 (Has 6 Screws That Holds On The Tin Solenoid Cover) |
| 92420A | Solenoid Pack, A604 (Shift Control) 1999-Up (Retro Fits) Has 7 Screws That Holds On The Tin Solenoid Cover |
| 92584B | Planet Kit, A604 (Contains: Front Planet, Rear Planet, 2-4 Hub, Overdrive Hub, Sun Gear,Ring Gear) 1996-Up (Rear Planet is 5 Gear And 1 1/8” From Step To End Of Shaft) (Can Use 92583A) |
| 92584 | Planet, A604 Rear (4 Gear) 1989-E91 (1” From Step To End OF Shaft) |
| 92614 | Sun Gear, A604 Rear Planet |
| 92740B | Valve Body, A604 (#66 On Plate) 1993-94 |
| 25527A | Sprocket, 6F50/6F55/6T70/6T75 Pump Driven (W/14 ID Splines For Shaft)(37 Teeth)(.595” Thick) (2.847”OD) 2007-Up (Dot Faces Up) |
| 92740D | Valve Body, A604 (With Governor Pressure Solenoid)(With 2 Case Connectors) 2006-08 |
| 92583B | Planet Kit, A604 (Contains: Front Planet, Rear Planet, 2-4 Hub, Overdrive Hub, Sun Gear, Ring Gear) 1996-Up (Rear Planet is 5 Gear And 1 1/8” From Step To End Of Shaft) (Can Use 92583A) |
| A606 | |
| 62420 | Solenoid Pack, A606 Shift (Bolts To Valve Body) 1993-04 |
| 62740A | Valve Body, A606 (Less Solenoid Pack) 1993 |
| FORD | |
| DCT250 | |
| DCT250SF | DCT 250 SHIFT FORK |
| DCT250-TCM | DCT 250 TRANSMISSION CONTROL MODULE |
| DCT250-CP | DCT250 CLUTCH PACK |
| F5A51 | |
| 41740CB | Valve Body, F5A51/A5GF1/A5HF1 (7 Solenoids)(6 Solenoids Are The Same, The EPC Solenoid Is Different) |
| FNR5 | |
| 138715A | Differential Assembly, 4F27E (85 Teeth Ring Gear, 1 Groove) (34 Teeth Pick-Up) 1999-Up |
| 138715AC | Differential Assembly, 4F27E (83 Teeth Ring Gear No Groove) (24 Teeth Pick-Up) |
| 138715CB | Differential Assembly, FNR5 (85 Teeth Ring Gear, 2 Groove)(14 Bolt)(25 Roller Cone Bearings)(24 Teeth Pick-Up) 2005-Up |
| 138715CJ | Differential Assembly, FNR5 (88 Teeth Ring Gear, 2 Groove)(14 Bolt)(25 Roller Cone Bearings) (25 Teeth Pick-Up) 2005-Up |
| 138740C | Valve Body, FNR5 (6 Solenoids) (Cast # FS50) 2005-Up (Customer Must Use Their Manual Valve) |
| 138740AC | FNR5 VALVE BODY – CAST # F550 |
| 138744C | Auxillary Valve Body, FNR5 (2 Solenoids)(3 Bolts To Case)(Cast # 050726D355) 2005-Up |
| 138759C | Rear Cover, FNR5 (9 Bolt) (Aluminum) (4 Rings) (No Cooler Line Fitting)(With Bronze Bushings) 2005-Up |
| 138500C | Pump, FNR5 (Uses A Body With An O-Ring, With .610” Thick Gears) 2005-Up |
| 138556C | Drum, FNR5 Reverse Clutch (2 Clutch)(2 Staked In Check Balls)(18 Holes)(36 Teeth Steels) (With 32 Stamped Notches On The End Where Clutches Slide In) 2005-Up |
| 138715AB | Differential Assembly, 4F27E (85 Teeth Ring Gear, 1 Groove) (24 Teeth Cast Iron Pick-Up) (14 Bolt Ring Gear) |
| 5R55W | |
| 16580GK | Planet Kit, 5R55S/5R55W (38 Teeth Sun Gear) 2002-Up (Contains: # 550,214,610,580,590, & 674) |
| 16500A | Pump Assembly, 5R55N/5R55S/5R55W (Fits A 24 Tooth And 38 Tooth Overdrive Sun Gear) |
| 16420G | Solenoid Assembly, 5R55S/5R55W (12 Pin Connector) 2002-03 (To ID Look For The Solid Brackets On The Solenoids) |
| 16420G-BRK | *BROKEN*Solenoid Assembly, 5R55S/5R55W (12 Pin Connector) 2002-03 (To ID Look For The Solid Brackets On The Solenoids) *BROKEN* |
| 16420GB | Solenoid Assembly, 5R55S/5R55W (12 Pin Connector) 2004-Up (To ID Look For The Slotted Brackets On The Solenoids) |
| 16420GB-BRK | *BROKEN*Solenoid Assembly, 5R55S/5R55W (12 Pin Connector) 2004-Up (To ID Look For The Slotted Brackets On The Solenoids)*BROKEN* |
| 16550G | Drum, 5R55S/5R55W Coast Clutch (2 Clutch) Cast Iron (8 Notches) (.320” Wide Lugs For #214 Drive Washer) 2002-Up |
| 16555A | Drum, 5R55N/5R55S/5R55W Direct (5 Clutch) (1/2” From Snap Ring Groove To Edge Of Drum) 1999-Up |
| 16582GK | Planet Kit, 5R55S/5R55W Forward (6 Gear) (Uses A 55 Tooth Sun Gear) 2002-Up (Contains: # 602, 592, 582, 622) |
| 16583G | 5R55W/S PLANET SET FRONT SUNGEAR |
| 16740G | 5R55W VALVE BODY W/ SOLENOID |
| 16690A | Park Gear, 5R55N/5R55S/5R55W (13 Lugs) (Uses A Press-On Pick-Up Reluctor Wheel) 1999-Up |
| FOR-5R55E-GS | 5R55W GUT STACK |
| 56630C | Center Support, 5R55E (Has A Caged Bearing In Ring Area)(With Speed Sensor) 1997-Up |
| 56582GK | 5R55W PLANET KIT |
| 5R55E | |
| 56740C | Valve Body, 4R44E/4R55E/5R55E W/6 Solenoids 1995-Up |
| 56582EAK | Planet Kit, A4LD/4R55E/5R55E Forward (Steel) (6 Gear) Uses A Bearing # 232 (Has A 1 Piece Bearing Inside) 1990-Up (Contains: # 232, 602, 235, 582) .(Can Use For All Planets) |
| 56583E | 5R55E PLANET SET 6 GEARS STEEL |
| 56583D | 5R55E/4R44E PLANET SET 4 GEAR STEEL |
| 56500 | 5R55E PUMP |
| 56520D | Stator, 4R44E/4R55E W/Gears (6 Bolt Electronic) 1995-Up |
| 56520G | Stator, 5R55E W/Gears (24 Teeth Inner Gear) W/Outer Caged Bearing 1997-Up |
| 56520GA | Stator, 5R55E W/Gears (16 Teeth Inner Gear) W/Outer Caged Bearing |
| 56580K | 5R55E OVERDRIVE ASSY SOLID PIN 24 T |
| FOR-5R55E-GS | 5R55E GUT STACK |
| 5R55N | |
| 16420A | Solenoid Assembly, 5R55N (12 Pin) 1999-Up (Some Jaguar 1999-02)(Has Electrical Connector That The 16420G & 16420GB Does Not Have) |
| 4R44E | |
| 56580B | Planet, 4R44E/4R55E Overdrive (With Reluctor Ring) With 1 Piece Bearing # 216 (With Oil Baffle) W/Solid Pins (Retro 56580A) (Can Use 56580BA) |
| 56750H | Bell Housing, 4R44E (3.0L) (Top Bolts Are 4 3/4”) 6 Bolt Pump 1995-96 (W/3 Bolt Starter) (Cast # 95GT-7A834-CB or 95GT-7976-CB) |
| 4R70W | |
| 76500B | Pump, AODE/4R70W (.608” Pump Gears)(Uses An Aluminum Intermediate Piston) 1995-03 |
| 76624B | 4R70W SUNGEAR SHELL |
| 76630 | Center Support, AOD/AODE/4R70W (With 6 Outer Lugs) 1980-03 |
| 76630H | 4R75W CENTER SUPPORT 5 LUG |
| 76583 | AOD PLANET SET |
| 76583BNS | 4R70W PLANET SET W/OUT SHELL |
| 76583H | 4R75W PLANET SET RIVETED SHELL |
| 76583HA | Planet Kit, 4R70W/4R75W/4R70E/4R75E (Top Cover Is 5.115”OD And Is Welded On) 2004-Up (Contains: 76624HA, 594C, 244C, 244CA, 612A, 584H) |
| 76584B | Planet, AODE/4R70W (Top Cover Is 4.845”OD & Rivited On) (25 Teeth On Long Gears) 1992-03 |
| 76584H | Planet, 4R70W/4R75W/4R70E/4R75E (Top Cover Is 5.115”OD & Is Welded On) 2004-Up (Will Retro Fit The 76584B)(Can Use 76584B) |
| 76594B | Ring Gear, AODE/4R70W (88 Teeth With Holes) (Park Lugs Are 15/16” Long) 1992-Up |
| 76740 | Valve Body, AOD 1980-81 |
| 76740E | Valve Body, 4R70W (Electronic) (.163”OD Dowel Pins) 1996-97 (Cast # RFF6AP) Uses A Wire Harness |
| 76770BC | Extension Housing, AODE/4R70W 4×4 (6 3/8” Long) Aluminum W/2 Threaded Bosses For Shifter (Cast # RF-F2TP-7A040-BA or RF-3L3P-7A040-AB) |
| 76770C | Extension Housing, AODE/4R70W 2WD (10 1/2” Long) Large Seal (With Speed-O Hole) 1993-03 |
| 4R75W | |
| 76554CK | Drum, AODE/4R70W/4R75W/4R70E/4R75E Forward With Solid Shaft (5 Clutch) (Stamped Steel) 1992-Up |
| 76556GK | Drum, 4R70W/4R75W/4R70E/4R75E Reverse With Diode Sprag 1998-Up (3 or 4 Clutch According to Pressure Plate Used) (Stamped Steel) (Has 14 Splines On Drum Where Doide Inner Race Rides) |
| 76555D | Drum, AODE/4R70W/4R75W/4R70E/4R75E Direct (4 or 6 Clutch) (Stamped Steel) 1989-Up (The 6 Clutch Uses A 76146A Pressure Plate) |
| 76583H | 4R75W PLANET SET RIVETED SHELL |
| 76583HA | Planet Kit, 4R70W/4R75W/4R70E/4R75E (Top Cover Is 5.115”OD And Is Welded On) 2004-Up (Contains: 76624HA, 594C, 244C, 244CA, 612A, 584H) |
| 76583HANS | 4R75W GEAR TRAIN w/OUT SHELL |
| 76594C | 4R75W RINGGEAR W/O HOLES 88T |
| 76740EA | Valve Body, 4R70W (Electronic) (.163”OD Dowel Pins) 1998-00 (Cast # RFF6AP) Uses A Black Plastic Enclosed Circuit Board |
| 76740F | Valve Body, 4R70W/4R75W/4R70E/4R75E (W/Only 2 Round Backing Plates On Top Of ValveBody) (Cast # RF-1L3P-7A092- AA) 2001-Mid 08 (Uses A Black Plastic Enclosed Circuit Board) (With Superior “Super Tough Valve Body Plate”) |
| 76740G | 4R75W VALVE BODY (2 PLATE)WIRED HARNESS 092UP |
| 76500G | Pump, 4R70W/4R75W/4R70E/4R75E (.608” Gears)(Uses A Bonded Intermediate Piston) 2004-Up |
| 76612A | 4R70W SUNGEAR W/O GROOVE |
| 76612H | 4R75W SUNGEAR W/GROOVE ON SPLINES |
| FOR-AOD-GS | AOD GUTSTACK |
| FOR-4R70W-GS | 4R70W GUT STACK |
| FOR-4R75W-GS | 4R75W GUT STACK |
| 4F27E | |
| 138556A | Drum, 4F27E Reverse Clutch (2 Clutch) (With 2 Check Ball Capsules) (18 Holes) ..(36 Teeth Steels)(Smooth On The End Where Clutches Slide In)1999-Up |
| 13815CB | Differential Assembly, FNR5 (85 Teeth Ring Gear, 2 Groove)(14 Bolt)(25 Roller Cone Bearings)(24 Teeth Pick-Up) 2005-Up |
| 138740A | Valve Body, 4F27E (Ford) (6 Solenoid) (Cast # XS4P-7A101-AC) (Customer Must Use Their Manual Valve) |
| 138740B | Valve Body, 4F27E (FN4A-EL, Mazda) (6 Solenoid) (Cast # FN11)(Customer Must Use Their Manual Valve) |
| 138759A | Rear Cover, 4F27E (9 Bolt) (Aluminum) (4 Rings) (No Cooler Line Fittings) (With Babbit Bushing) (Conversion) (Mazda) |
| 138500B | Pump, 4F27E (Uses A Body With An O-Ring, With .535” Thick Gears) 1999-Up |
| 138759AA | Rear Cover, 4F27E (9 Bolt) (Aluminum) (4 Rings) (With 1 Cooler Line Fitting Hole) 1999-04 (Ford) |
| 4R100 | |
| 36554H | Drum, E4OD/4R100 Forward Clutch (4 Clutch) 1989-Up (Spline Length Is The Full Length of The Drum Bore) |
| 36554HA | Drum, E4OD/4R100 Forward Clutch (4 Clutch) 1998-Up (Spline Length Is Only 1/2 The Length Of The Drum Bore) (Retro Fits To 1989) |
| 36555CA | E40D/4R100 DIRECT DRUM 4 CLUTCH 1 FEED HOLE 95-97 |
| 36555F | Drum, 4R100 Direct Clutch (5 Clutch) W/Out Diode 2000-01 (Has 16 Lugs For Mechanical Diode) Can Use 36555DK |
| FOR-4R100-GS | 4R100 GUT STACK |
| 36582D | Planet, E4OD/4R100 Forward (6 Gear) Steel (Bearing Type) 1997-Up |
| 36584D | Planet, E4OD/4R100 Rear (6 Gear) Steel (W/24 Lug Hub) 1998-Up |
| 36500C | PUMP E40D CAST # E9 (1989-94) |
| 36500CA | PUMP E40D CAST # F5 (11″ BOLT) (1995-98) |
| 36500DA | Pump, 4R100 (Cast # RFF8) 12 Bolt (Less Valves) 1998-Up (Uses A Stamped Steel Coast Clutch Drum) Non-PWM |
| 36500DB | Pump, 4R100 (Cast # RFF8) 12 Bolt (Less Valves) 1998-Up (Uses A Stamped Steel Coast Clutch Drum) PWM Type |
| 36420 | Solenoid Pack, E4OD 1989-94 (9 Pin) (.100” Thick Plastic Connector) |
| 36420AA | 4R100 SOLENOID PACK 95-97 |
| 36420AC | 4R100 SOLENOID PACK 95-97 |
| 36420M | E40D/4R100 SOLENOID PACKS MIXED |
| 36555DA | E40D/4R100 DIRECT DRUM 5 CLUTCH 1 FEED HOLE 95-97 |
| 36580BB | E40D OVERDRIVE PLANET 4 PIN STEEL 1 7/16″ HUB W/NOTCHES 94-98 |
| 36580BD | 4R100 OVERDRIVE PLANET 4 PIN STEEL 1 7/16″ HUB 99-UP |
| 36583BB | E40D GEARTRAIN W/4PIN ALUM FRONT PLANET 3PIN REAR PLANET 12 LUG |
| 36583BC | 4R100 GEARTRAIN W/4 PIN ALUM FRONT PLANET 4 PIN REAR PLANET 24 LUG |
| 36583CB | E40D GEARTRAIN W/3 PIN ALUM FRONT PLANET 3 PIN REAR PLANET 12LUG |
| 36583CC | E40D GEARTRAIN 3 PIN FRONT PLANET 4 PIN REAR PLANET ALUM 12 LUG |
| 36583DD | 4R100 GEARTRAIN W/6 PIN STEEL FRONT & REAR PLANET 24 LUG |
| 36583D | E40D/4R100 PLANET SET 6 GEAR STEEL |
| 36740DB | Valve Body, E4OD/4R100 (Non-PTO Models)(Cast # RF-F6) 1996-Up |
| 36770C | E40D EXT.HOUSING 2WD |
| 36770E | E40D EXTENSION HOUSING 4WD ALUMINUM 1989-97 |
| 36770ED | E40D/4R100 EXTENSION HOUSING 4WD ALUMINUM W/O SPEED SENCOR 98-UP |
| 36770DD | E40D/4R100 EXT.HOUSING 2WD W/SPEEDO HOLE ON TOP |
| 36630 | Center Support, E4OD/4R100 (Aluminum Plate Only) 1989-Up (These Are Machined & Comes With S36630-2) |
| 36636BK | E40D CENTERSUPPORT KIT W/OUT |
| 36636BAK | E40D/4R100 SUPPORT KIT DIRECT DRUM/CENTER SUPPORT |
| 36675 | SHAFT,E4OD OVERDRIVE W/PILOT (FOR BUSHING TYPE OUTPUT SHAFT) |
| 36580ABK | 4R100 OVER DRIVE PLANET SET 3 GEAR STEEL |
| 36580BDK | 4R100 OVER DRIVE PLANET SET 4 GEAR STEEL |
| 36582DK | 4R100/E40D FRONT PLANET 6 GEAR STEEL SET |
| 36584DK | 4R100/E40D FRONT PLANET 6 GEAR STEEL SET |
| FOR-E40D-GS | E40D GUTSTACK |
| 36770DB | 4R100 EXT HOUSING W/SENSOR 101/2″ 2WD LARGE SEAL |
| 5R110W | |
| FOR-5R110W-GS | 5R110W GUT STACK 2008 |
| 136740A | Solenoid Body Assembly, 5R110W (7 Solenoid With 5 Pressure Switches) (Does Not Come With Wire Harness) |
| 136740B | Solenoid Body Assembly, 5R110W (7 Solenoid With 2 Pressure Switches) (Does Not Come With Wire Harness) |
| 6F35 | |
| 46550B | Drum, 6F35 4-5-6 Clutch (Aluminum)(5 Clutch)(24 Outer Lugs For 3-5 Reverse Clutch) 2009-Up |
| 46410B | Switch, 6F35 Neutral Safety W/Rooster Comb (W/3 Prong Connector)(Cast # C1080) 2009-Up |
| 46706B | Sprocket, 6F35 Driven (44 Teeth) (.922” Wide Teeth) 2009-Up |
| 46706BA | Sprocket, 6F35 Driven (41 Teeth) (.922” Wide Teeth) 2009-Up |
| 46715B | Differential, 6F35 (2WD)(7” Tall)(4 Gear Planet)(Uses 39 Teeth Sun Gear) 2009-Up |
| 46715C-1 | 6T30 DIFF KIT 37T SUNGEAR |
| 46510B | Pump Body, 6F35 W/Gears (Aluminum) (Cast # 7A103 EXXDA On Front)(23 Threaded Holes) 2009-Up |
| 46624B | Sun Gear, 6T35 Reaction W/Hub (35 Teeth, No Groove)(2.300”Overall Height) 2009-Up |
| 46626B | Sun Gear, 6F35 Output Planet (37 Teeth, No Groove)(W/36 Teeth Clutch Hub) 2009-Up |
| 46644B | Diode, 6F35 Low/Reverse (.792”Thick Outer Race)(32 Inner Teeth On Inner Race) 2009-Up |
| 46582A | Planet, 6T40 Input (5 Gear) (Uses 41 Teeth, 1 Groove Sun Gear)(1.339” Overall Thickness) 2008-Up |
| 46582B | Planet, 6F35 Input (5 Gear) (Uses 41 Teeth, No Groove Sun Gear)(1.409” Overall Thickness) 2009-Up |
| 46583B-3 | 6F35 GEAR TRAIN W/SHELL- 3 PIN |
| 46584A | Planet, 6T40 Output (5 Gear) (Uses 37 Teeth, 1 Groove Sun Gear)(2.553” Overall Thickness) 2008-Up |
| 46584AK | Planet, 6T40 Output (5 Gear) (Uses 37 Teeth, 1 Groove Sun Gear)(2.553” Overall Thickness) 2008-Up *KIT* |
| 46584B | Planet, 6F35 Output (5 Gear) (Uses 37 Teeth, No Groove Sun Gear)(2.673” Overall Thickness) 2009-Up |
| 46586B | Planet, 6F35 Reaction (4 Gear) (34 Teeth, No Groove Pinions)(Cast # 102810000818) 2009-Up |
| 46588B | 6F35 LOW/REVERSE CLUTCH HOUSING |
| 46750B | Bell Housing, 6F35 (2.5L)(6 3/8” Top Bolts)(Starter At 2:00)(Cast # RFBB5P-7976-BB) 2009-Up |
| 46760BB | Case, 6F35 (17 Bolts To Bell)(Cast # RF9L8P-7006-CA) 2009-Up (Uses A Metal Side Pan) |
| FOR-6F35-GS | 6F35 GUT STACK |
| 46740B | Valve Body, 6F35 (Cast # EBJZA On Bottom Side) 2008-Up |
| 46740BB-TCM | 6F35 VALVE BODY COLORFUL SOLENOID |
| 46740B-TCM | 6F35 VALVE BODY TAN SOLENOID |
| 6F50 | |
| 25740AB | 6F50 VALVE BODY LATE |
| 25740A | Valve Body, 6F50/6F55 (Cast # 7T4P-7H195-AF) 2007-Up (Does Not Come With Solenoid Assembly) |
| FOR-6F50-GS | 6F50 GUT STACK |
| 6HP26 | |
| 49740BDK | Valve Body, ZF6HP26X (Contains Illustration #’s 420, 444, 446, 698, 740 & 765) (Fits 1068 020 Units Ending In 043/044/065) |
| ZF-6HP26-GS | 6HP26 GUT STACK |
| 6HP28 | |
| 49740BXK | 6HP28 VALVE BODY |
| 49740A | Valve Body, ZF6HP26 (Ford) (Navigator) (With 7 Solenoids) 2005-Up |
| 6R140 | |
| 236510A | Pump Body, 6R140 W/Gears (Cast # RFBC3P-7A105-AD) 2011-Up |
| 236550A | Drum, 6R140 Overdrive Clutch (7 Clutch) (W/Turbine Shaft)(W/Forward Planet Ring Gear) 2011-Up |
| 236554A | Drum, 6R140 Forward/Direct Clutch (6 1/4”Tall)(5 Forward Clutch & 5 Direct Clutch) 2011-Up |
| 236570A | Hub W/Shaft, 6R140 Overdrive Clutch (.918”OD Front Pilot)(.918”OD Rear Pilot) 2011-Up |
| 236574A | Hub, 6R140 Forward Clutch W/Hollow Shaft 2011-Up |
| 236575A | Hub, 6R140 Direct Clutch (W/4 Tabs)(Cast # BC3P-7H351-AC) 2011-Up |
| 236580A | Planet, 6R140 Rear (W/Sprag) (6 Gear)(W/Low/Reverse Clutch Hub) 2011-Up |
| 236632A | Intermediate Clutch Housing, 6R140 (Aluminum)(5 Clutch)(Cast # RFBC3P-7L328-AE) 2011-Up |
| 236740A | Valve Body Assembly, 6R140 (Diesel) (7 Solenoid)(Metal Tag # 180A4789 & 1006243163828) 2011-Up |
| FOR-6R140-GS | 6R140 GUT STACK |
| 6R60 | |
| 49446C | Circuit Board, 6R60 Control Module (Cast # 6l2P14C247AC) 2006-Up |
| 49740C | Valve Body, 6R60 (With 7 Solenoids) (Cast # RF6L2P-7A101-DA On Filter Side) (Cast # RF6L2P-7A092-DA On Case Side) 2006-Up (Seperator Plate Cast # 6L2P-7Z490-FB) |
| FOR-6R60-GS | 6R60 GUT STACK |
| 6R80 | |
| 49740F | Valve Body, 6R80 2009-Up (Includes Circuit Board And Both Speed Sensors) |
| 49550F | Drum W/Shaft, 6R80 Overdrive Clutch Drum (E Clutch)(With 71 Teeth Forward Planet Ring Gear & 3 Ring Shaft With 32 Splines, 1.030”OD, .870”OD Pilot) (6 Clutch) 2008-Up |
| 49500 | 6R60/6R80 PUMP W/FLATS |
| 49500E | 6R80 PUMP LUG STYLE |
| 49570C | Hub W/Shaft, 6R60 Overdrive Clutch (10 7/8” Long) (.670”OD Front Pilot 1 1/4” Long) 1/2006-8/2006 |
| 49570E | 6R60/80 OVER DRIVE CLUTCH HUB |
| 49580 | 6R80 OVER DRIVE PLANET NO SPRAG STYLE |
| 49580K | 6R80 O.D. PLANET SET L/O SPRAG |
| 49580K-SPG | 6R80 O.D. PLANET SET W/SPRAG |
| 49580-SPR | 6R80 O.D. PLANET SET W/SPRAG |
| 49590 | 6R80 OVER DRIVE RING GEAR |
| 49632 | Center Support, 6R60 (Aluminum) 3 3/4” Thick (8”OD) Uses 30 Teeth Intermediate Steels (Cast # 6L2P-7L328-CC) 2006-Up |
| 49632C | Center Support, 6R60 (Aluminum) 4 3/4” Thick (8”OD) Uses 30 Teeth Intermediate Steels (Cast # 6L2P-7L328-CC) 2006-Up |
| FOR-6R80-GS | 6R80 GUT STACK |
| CD4E | |
| 96420A | Solenoid Assembly, CD4E 1994-Up |
| 96500A | Pump, CD4E 1997-Up |
| 96554CA | Drum, CD4E Forward/Direct (Uses 4 Direct Steels .079” Thick) L1998-Up (Forward Clutch Return Spring Has 1 Large Coil Spring) |
| 96582BK | Planet Set, CD4E Forward (Low/Intermediate) (4 Gear) (Can Use 96582) |
| 96583 | CD4E GEAR TRAIN 4 PIN |
| 96740A | Valve Body, CD4E W/Solenoid Pack (CAST # RFF7) 1997-Up |
| FOR-CD4E-GS | CD4E GUT STACK |
| CFT30 | |
| 206740A | Valve Body, CFT30 With 5 Solenoids (Cast # 1072-427-048 Or 1072-427-059) 2005-Up |
| 206587A | Planet, CFT30 Reverse (With Input Shaft) (6 Gear)(7 5/8”Long)(30 Teeth Clutch Hub)(27 Input Splines) 2005-Up |
| TF80 | |
| 255740C | Valve Body, TF-80SC (Volvo) |
| TF81 | |
| 255740A | Valve Body, TF-81SC (Ford/Mazda) 8 Solenoid (Cast # 5G13-7Z488-8A)(Cast # A1, A2, Or A3 On Separator Plate) |
| GM | |
| GM-9T65-GS | 9T65 GUTSTACK |
| GM-9T65-V/B | 9T65 VALVEBODY |
| GM-9T65-DIFF | 9T65 DIFFERENTIAL |
| 116740AB | Valve Body, 1000/2000 Allison (7 Solenoids) (Two Tube Type) 2006-09 |
| 116760A | Case, 1000/2000 Allison (With PTO) 2000-Up |
| 116500AA | ALLISON 1000 PUMP BODY CAST # 26542798 STATOR CAST 798 |
| 116554B | Drum, 1000/2000 Allison C1/C2 Clutch (With Reluctor Ring)(Non PTO Type) 2000-04 |
| 116740B-BAD | *BAD*Valve Body, 6F35 (Cast # EBJZA On Bottom Side) 2008-Up |
| 4L30E | |
| 24520E | Stator W/Gears, 4L30E (2 Valve Type)(Less Valves) 1989-99 (Cast # 96016689)(Pressure Regulator Valve Is .515”OD) |
| 400 | |
| 34500 | Pump, 400 (6 Bolt)(Body Cast # 895, Stator Cast # 896) 1971-Up |
| 4L80E | |
| 34555EK | Drum, 4L80E Direct Clutch W/Sprag 1991-Up |
| 34554EA | Drum, 4L80E Forward Clutch W/Ring Gear (Molded Piston Type) 1997-Up |
| 34740P | 4L80E VALVE BODY PARTS |
| 34580AK | Planet Kit, 4L80E Overdrive (With Sprag With .196”OD Rollers) 2001-Up (Contains; # 551, 580A, & 650A) (Retro-Fits 1991-Up) |
| 34582AA | Planet, 4L80E Front (4 Gear Angled Teeth) (Uses Roller Type Sprag With No Legs Or Spacer Has A Bevel Under Sprag) 1996-Up |
| 34584EA | Planet, 4L80E Rear (4 Gear Angled Teeth)(Less Electric Pick-Up) 1999-Up (.795” Tall Pinion Gears) (Can Use 34584E) |
| 34500E | Pump, 4L80E (Body Cast # 778, 779, or 702)(Stator Cast # 184 or #263 With .500”OD TCC Limit Valve) 1991-96 (Less Valves) |
| 34500ED | Pump, 4L80E (Body Cast # 302 Or 779) (Stator Cast # 512 Or 379) 2004-Up (Less Valves)Will Not Retro-Fit |
| 34740EC | Valve Body, 4L80E (4 Solenoids) (Cast # 24204267) (With Plate And Accumulator Assembly)(Uses A 34435A Pressure Control Solenoid With 2 Flat Blades On The End) 1997-04 |
| 34740ED | Valve Body, 4L80E (4 Solenoids) (Cast # 24204267) (With Plate And Accumulator Assembly) (Uses A 34435B Pressure Control Solenoid With 2 Pin Connector On The Side) 2004-Up |
| 5L40E | |
| 144740C | Valve Body, 5L40E (Cadillac) 5 Switch (Aluminum W/4 Accumulators) 2003-Up |
| 6T30/40/45 | |
| 46420A | Solenoid Assembly, 6T40/6T45 (7 Solenoid) (14 Pin Connector)(Cast # 24252871 On Metal Plate) 2008-Up (These Must Be Flashed)(THESE ITEMS NEED TO BE VERIFIED BY THE VIN NUMBER!!) |
| 46420AA | Solenoid Assembly, 6T40/6T45 (7 Solenoids)(14 Pin Connector)(Cast # 24256523 On Metal Plate) 2008-10 (These Must Be Flashed)(THESE ITEMS NEED TO BE VERIFIED BY THE VIN NUMBER!!) |
| 46420A-BAD | *BAD*Solenoid Assembly, 6T40/6T45 (7 Solenoid) (14 Pin Connector)(Cast # 24252871 On Metal Plate) 2008-Up (These Must Be Flashed)(THESE ITEMS NEED TO BE VERIFIED BY THE VIN NUMBER!!)*BAD* |
| 46510A | Pump Body, 6T40 W/Gears (Aluminum) (Cast # 24245547 On Front) 2008-Up |
| 46510C | Pump Body, 6T30 W/Gears (Aluminum)(Less Spring Tention)(Cast 12111069) 2008-Up |
| 46510H | Pump Body 6T40 Hybrid (5 Bolt Aluminum)(.985”ID Filter Neck Hole) 2012-Up |
| 46550A | Drum, 6T40 4-5-6 Clutch (Aluminum)(4 Clutch)(36 Outer Lugs For 3-5 Reverse Clutch) (With No O-Ring Groove Inside For The 4-5-6 Clutch Piston)(Piston #964 Has 2 Outer O-Ring Grooves)(1st Design) 2008-10 |
| 46550AA | Drum, 6T40 4-5-6 Clutch (Aluminum )(4 Clutch)(36 Outer Lugs For 3-5 Reverse Clutch) (With No O-Ring Groove Inside For The 4-5-6 Clutch Piston)(Piston #964 Has 2 Outer O-Ring Groove)(2nd Design) 2010-12 |
| 46550C | Drum, 6T30 4-5-6 Clutch 2009-Up |
| 46558A | Housing, 6T40/Hybrid Low/Reverse & 1-2-3-4 Clutch (Aluminum)(Cast # CH6-A Under Low/Reverse Clutch Piston) 2008-Up |
| 46558C | Housing, 6T30 Low/Reverse & 1-2-3-4 Clutch (Aluminum)(Cast 24252568) 2008-Up |
| 46583AK | Planet Kit, 6T40/Hybrid 2008-Up (Includes: 626A, 584A, 596A, 594A, 582A, 612A, 592A, 586A, 624A)(Can Use 46583AA & 46583AB) |
| 46583AB | Planet Kit, 6T40/Hybrid 2008-Up (Includes: 626A, 584A, 596A, 594A, 582A, 612A, 592A, 586AA,624A)(Can USe 46583A & 46583AA) |
| 46583C | Planet Kit, 6T30 2009-Up (Includes 626C, 584C, 596C, 594C, 592C, 582C, 612C, 586C, 624C) |
| 46586A | Planet, 6T40/Hybrid Reaction (4 Gear) (34 Teeth, 1 Groove Pinions) 2008-Up |
| 46586AA | Planet, 6T40/Hybrid Reaction (3 Gear) (34 Teeth, 1 Groove Pinions) 2008-Up |
| 46588A | 6T40 HOUSING LOW / REVERSE CLUTCH |
| 46624A | Sun Gear, 6T40/Hybrid Reaction W/Hub (35 Teeth, 1 Groove)(2.350”Overall Height) 2008-Up |
| 46624AA | Sun Gear, 6T40/Hybrid Reaction W/Hub (35 Teeth, No Groove)(2.350”Overall Height) 2009-Up |
| 46644AA | Diode, 6T30/6T40 Low/Reverse (.709”Thick Outer Race)(48 Inner Teeth On Inner Race) 2008-Up |
| 46644H | Diode, 6T40 Hybrid Low/Reverse (48 Inner Teeth)(.710”Outer Race)(Aluminum Inner) (48 Out Teeth) 2012-Up |
| 46715AK | 6T40 31TOOTH SUNGEAR DIFF KIT 89 TOOTH RING |
| 46715AEK | 6T40 41 TOOTH SUNGEAR DIFF KIT 89 TOOTH RING GEAR |
| 46715BA | Differential, 6F35 (AWD)(7” Tall)(4 Gear Planet)(Uses 39 Teeth Sun Gear) 2009-Up |
| 46715DK | 65T40 DIFF. SET AWD |
| 46740A | Valve Body, 6T40/6T45/6T50 (Gen 1)(Cast # 24248223 On Bottom Side) 2008-Up |
| 46740A-BAD | *BAD*Valve Body, 6T40/6T45/6T50 (Gen 1)(Cast # 24248223 On Bottom Side) 2008-Up*BAD* |
| 46740AA | Valve Body, 6T40/6T45/6T50 (Gen 2)(Cast # 24249322 On Bottom Side) 2008-Up |
| 46740AA-TCM | 6T40 VALVE BODY 2ND GEN W/ TCM |
| 46740A-TCM | 6T40 VALVE BODY 1ST GEN W/ TCM |
| 46740H | Valve Body, 6T40 Hybrid (Aluminum Top Housing)(Cast 24286446) 2012-Up |
| 46634 | 6T40 RING TOWER |
| 46634A | Ring Tower, 6T40 3-5 Reverse & 4-5-6 Clutch (4 Ring)(3 Bolt)(2.322”Long) 2008-09 |
| GM-6T30-GS | 6T30 GUT STACK |
| GM-6T40-GS | 6T40 GUT STACK 1ST |
| GM-6T45-GS | 6T45 GUT STACK |
| 700R4 | |
| 74740 | Valve Body, 700R4 (No Switch) 1982-E87 |
| 74740A | Valve Body, 700R4 (1 Switch) 1982-E87 |
| 74958 | Yoke Tube, 700R4/4L60E 1985-Up |
| 74500 | Pump, 700R4 (Small Shaft) (Stator Cast # 031, 025) (Body Cast # 380) 1982-E84 |
| 74500A | Pump, 700R4 (Large Shaft) Non-Aux (Stator Cast # 025, 031, 304, or 570) (Body Cast # 132, 303, 380, 704 or 732) L1984-3/87 (025, 031 Fits 380 Body) (570, 304, Fits 132, 303, 704, 732 Body) |
| 74500B | Pump, 700R4 (Auxiliary Type) 4/1987-92 (Stator Cast # 570, 596, 612, or 828) (Body..Cast # 132, 303, 704 or 732) (Less Valves) |
| 74554K | Drum W/Shaft, 700R4 Input (27 Spline W/Pilot) 1982-E84 (Small Shaft) (V-8) |
| 74583GK | 4L60/65E PLANET SET 5 GEAR |
| 74554GK | Drum W/Shaft,4L60E/4L65E Input (30 Spline No Pilot)1998-04(large Shaft) |
| 74554GLK | Drum W/Shaft, 4L60E/4L65E/4L70E Input (30 Spline No Pilot)(Large Shaft)(No Reluctor On Shaft) 2005-06 (Can Use 74554HK) |
| 74554GLK-UL | 4L60/65F INPUT DRUM 300MM 05-06 UNLOADED |
| 74584 | Planet Kit, 700R/4L60E Rear (4 Gear) (Bat Wing Washer Type, No Oil Slinger) (Planet, Sun Gear, Ring Gear, Hub, & Bearing) |
| 74678 | Output Shaft, 700R4 (18 1/8” Long) 1982-91 |
| 74678AB | Output Shaft, 4L60E (18 1/4” Long) (No Governor Gear) 1992-Up (3 1/2” Long Splines) |
| 74680CA | Governor, 700R4 (Inner & Outer Weight Is .187” Thick)(With Square Inner Weight) |
| 74678BA | Output Shaft, 4L60E (4X4) (13 1/4” Long) (No Governor Gear) 1992-Up |
| 74678C | Output Shaft, 700R4 (4×4) (13 3/4” Long)(All Except 2.8L) 1982-92 |
| 74678A | Output Shaft, 700R4 (18 1/4” Long) (W/Electric Pick-Up) 1987-92 (4 1/2” Long Splines) (Will Work For 3 1/2” Long Splines) (With Governor Gear) |
| 74740B | Valve Body, 700R4 (No Switch) (ECM Type, W/Aluminum Plug) 1986-87 |
| 74740C | Valve Body, 700R4 (2 Switch) 1982-E87 |
| 74740E | Valve Body, 700R4 (3 Switch) 1982-E87 |
| 74740F | Valve Body, 700R4 (4 Switch) 1982-E87 |
| 74770D | Extension Housing, 700R4/4L60E 4X4 (For 208 Transfer Case) 1982-95 (4 Bolts to Case) (Cast Iron) (Cast # 15628188) (3 1/2” From Gasket To Gasket) (Mount Surface Does Not Hang Below Gasket) |
| 74770E | Extension Housing, 700R4/4L60E 4X4 (For 207/231 Transfer Case) 1982-95 (4 Bolts to Case) Aluminum With Side Threaded Holes (Cast # 14040514) |
| 74770FB | Extension Housing, 4L60E 2WD (4 Bolts To Case) (3 Bolt Side Bracket W/1” Speed Sensor Hole) 1996-97 |
| 74554GKUL | 4l60/65E INPUT DRUM 300MM UNLOADED |
| 4L60E/4L65E | |
| 4L60ROTOR | 4L60E ROTOR & SLIDE |
| 74425Q | Solenoid & Wire Harness, 4L60E Torque Converter Clutch (Blue Connector) L1995-02 |
| 74614 | Sun Gear, 700R4/4L60E Rear Planet |
| 74500C | Pump, 4L60E (W/1 Piece Case ) (Non-Pulse Width Modulated) 1992-95 (Stator Cast # 101, 596, 612) (Body Cast # 132, 303, 704 Or 732)(Less Valves) |
| 74500D | Pump, 4L60E (W/1 Piece Case) 1995-96 (Stator Cast # 504, 838, or 955) (Body Cast # 073, 836, or 951) Can Use 74500DA (Less Valves) |
| 74500G | Pump, 4L60E/4L65E (W/2 Piece Case) (13 Vane) 1997-9/2002 (Stator Cast # 611 or 705) Less Valves (6 7/8” Long Stator Tube) (Uses A Boost Valve Sleeve 2.100” Overall Length) |
| 74500GC | Pump, 4L60E/4L65E (With 2 Piece Case) (13 Vane) 9/2002-05 (Stator Cast # 611 or 705) Less Valves (7 3/8” Stator Tube, Uses A Boost Valve SLeeve 2.100” Overall Length) (Body Cast # 073 or 555) O-Ring To Rear Surface Measures .100” Thick |
| 74500GA | Pump, 4L60E/4L65E (W/2 Piece Case) (13 Vane) 1997-9/2002 (Stator Cast # 611 or 705)Less Valves (7 3/8” Long Stator Tube)(Uses A Boost Valve Sleeve 2.100” Overall Length)(Body Cast # 073 or 555) O-Ring To Rear Surface Measures .160” Thick |
| 74500GD | Pump, 4L60E/4L65E (With 2 Piece Case)(13 Vane) 2004-05 (Stator Cast # 611)(Less Valves) (6 7/8” Long Tube, Uses A Boost Valve Sleeve 2.100” Overall Length)(Body Cast # 073) (Does Not Use An Outer O-Ring) |
| 74500GF | Pump, 4L60E/4L65E (With 2 Piece Case)(13 Vane) 2004-05 (Stator Cast # 611 or 672)(Less Valves)(6 7/8” Long Tube, Uses A Boost Valve Sleeve 1.885” Overall Length) (Body Cast # 073) (Does Not Use An Outer O-Ring)(Uses Stator Tube Without ISS Hole) |
| 74500GG | Pump, 4L60E/4L65E (With 2 Piece Case)(13 Vane) 2003-05 (Stator Cast # 611 Or 672) (Less Valves)(7 3/8” Long Tube, Uses A Boost Valve Sleeve 1.885” Overall Length)(Body Cast # 073) (Does Not Use An Outer O-Ring)(Uses Stator Tube Without ISS Hole) |
| 74500H | Pump, 4L60E/4L65E (W/2 Piece Case) (13 Vane) 2005-06 (Stator Cast # 075 or 672)(Body Cast # 073) Less Valves (6 7/8” Long Stator Tube) Does Not Use An Outer O-Ring (Uses Stator Tube With ISS Hole, But No ISS Sensor) |
| 74500HK | 4L60/65 PUMP (W/2PC. CASE)(13 VANE) ’05-’06 (STATOR CAST #075 OR 672) |
| 74500HA | Pump, 4L60E/4L65E (W/2 Piece Case) (13 Vane) 2005-Up (Stator Cast # 075 or 672) (Body Cast #073) Less Valves (7 3/8” Long Stator Tube) Does Not Use An Outer O-Ring (Uses Stator Tube With ISS Hole, But No ISS Sensor) |
| 74500HAU | 4L60/65 PUMP (NO SEAL w/ ISS CUTOUT) (SENSOR CAPPED) (7 3/8″L STATOR TUBE) 04-05 |
| 74500J | Pump, 4L60E/4L65E/4L70E (With 2 Piece Case) (13 Vane) 2005-Up (Stator Cast # 075 or 672) (Body Cast # 073) (Less Valves) (6 7/8” Long Stator Tube)(Does No tUse An Outer O-Ring) (Uses ISS Sensor) |
| 74554B | 4L60/65E REVERSE DRUM SQUARE HOLE |
| 74554DAK | Drum W/Shaft, 4L60E Input (30 Spline W/Pilot) 5/1993-Up |
| 74554EAK | Drum W/Shaft, 4L60E Input (27 Spline No Pilot) 5/1993-97 (Large Shaft) |
| 74554GK | Drum W/Shaft, 4L60E/4L65E Input (30 Spline No Pilot) 1998-04 (Large Shaft) (Long Splines W/O-Ring Groove Behind Splines) |
| 74554GLK | Drum W/Shaft, 4L60E/4L65E/4L70E Input (30 Spline No Pilot)(Large Shaft)(No Reluctor On Shaft) 2005-06 (Can Use 74554HK) |
| 74554HK | Drum W/Shaft, 4L60E/4L65E/4L70E Input (30 Spline No Pilot)(Large Shaft)(With 15 Teeth Reluctor On Shaft) 2005-Up |
| 74554JK | Drum W/Shaft, 4L60E Input (27 Spline No Pilot)(Small Shaft)(With 15 Teeth Reluctor On Shaft) 2005-Up |
| 74556AU | 4L60/65 REVERSE INPUT DRUM -SMALL ROUND HOLE- |
| 74556B | Drum, 4L60E Reverse Input (No Check Ball) 1992-Up (Has Square Oil Holes in Bore) Retro Fits 700R4 1987-Up |
| 74582BA | Planet, 4L60E/4L65E/5L70E Front(4 Gear)(Uses A 74238GA TOP BEARING)2007-Up |
| 74582B | Planet, 4L60E/4L65E/5L70E Front(4 Gear)(Uses A 74238GA TOP BEARING)1992-Up |
| 74582BK | Planet Kit, 700R4/4L60E (W/# 612, 582, 592, 602, 624, 614, 584, 594, 604 & 889) (W/Out Oil Slinger) |
| 74582G | Planet, 4L60E/4L65E Front (5 Gear)(Uses A # 74238 Top Bearing)(Retro Fits All 4 Gear Planets) 01-UP |
| 74582GK | 4L60E FRONT PLANET 5-PIN |
| 74583BK | Planet Kit, 700R4/4L60E (W/# 612, 582, 592, 602, 624, 614, 584, 594, 604 & 889) (W/Out Oil Slinger) |
| 74584GK | 4L60/65 REAR PLANET SET – 5 PIN- (w/PLANET, SUN GEAR, HUB, RING GEAR) 82-UP |
| 74584B | Planet, 700R4/4L60E Rear (4 Gear) (W/Batwing Washers & W/Out Oil Slinger) |
| 74584AK | Planet Kit, 700R4/4L60E Rear (4 Gear) (Bat Wing Washer Type, W/Oil Slinger) (Planet, Sun Gear, Ring Gear, Hub, & Bearing) |
| 74584BK | Planet Kit, 700R/4L60E Rear (4 Gear) (Bat Wing Washer Type, No Oil Slinger) (Planet, Sun Gear, Ring Gear, Hub, & Bearing) |
| 74602B | Hub W/Shaft, 4L60E/4L65E Front Ring Gear (Uses A Bearing # 74241B) 2001-03/2007 (Uses A 74238 Or 74238A Inner Bearing)(Can Use 74602BA) |
| 74602 | Hub W/Shaft, 700R4/4L60E Front Ring Gear (Uses A Washer # 74241) 1982-01 |
| 74612A | Sun Gear, 700R4/4L60E Front Planet L1982-Up |
| 74612B | Sun Gear, 4L60E/4L65E Front Planet 1997-Up (Presses Into The Forward Sprag Inner Race) (Sell 74648CD) |
| 74624 | Shell, 700R4/4L60E Reaction Sun |
| 74624B | Shell, 4L60E/4L65E Reaction Sun (Bearing Type) 2002-Up |
| 74648C | Sprag Assembly, 4L60E 3rd Design (29 Element) L1995-Up (Single Cage) |
| 74648CD | Sprag Assembly, 4L60E 6th Design (W/Press in Sun Gear) 1997-Up |
| 74740PC | Valve Body, 4L60E (5 Switch) (Aluminum W/Vented Manual Valve) 2003-08 (Uses A Solenoid #435 With 2 Prong Plastic Connector On Side Of Solenoid) (Does Not Fit Colorado Or Canyon) |
| 74740PC-PARTS | 4L60E VALVE BODY PARTS |
| 74740PB | Valve Body, 4L60E (5 Switch) (Aluminum W/Vented Manual Valve) 1996-02 (Uses A Solenoid #435 With 2 Flat Blades On End Of Solenoid) |
| 74740N | Valve Body, 4L60E (4 Switch Non-PWM) (Aluminum) 1992-E95 (4 Switch Not Counting The Manifold Pressure Switch) |
| 74760N | Case, 4L60E/4L65E (Bolt-On Type Bell)(The Outer Pump Seal Is The Metal/Rubber Compression Type) 9/2002-E07 |
| 74770 | Extension Housing, 700R4/4L60E 2WD (7 1/4” Long) (Uses 2 Bolt Mount on Bottom) 1982-95 |
| 74770A | Extension Housing, 700R4/4L60E 2WD (No Mount or Bracket) 1982-95 |
| 74770B | Extension Housing, 700R4/4L60E 2WD (2 Hole Side Bracket Type) 1982-95 |
| 74770KC | Extension Housing, 4L60E 4×4 (6 Bolts To Case) (4” Long) 1996-Up (Cast # 15028097) |
| 74770KB | Extension Housing, 4L60E 4×4 (6 Bolts To Case) (4” Long) 1996-Up (Cast #15028096) |
| 74770KD | Extension Housing, 4L60E 4×4 (6 Bolts To Case) (4 1/2” Long) 1996-Up (Cast # 15724744) |
| 74770L | Extension Housing, 4L60E 4X4 (6 Bolts to Case) (5” Long) 1996-Up (Aluminum) (6 Bolts to Transfer Case) (Cast # 15005474) |
| 74770LA | Extension Housing, 4L60E 4X4 (6 Bolts to Case) (5” Long) 1996-Up (Aluminum) (6 Bolts to Transfer Case) (Cast # 15726252) |
| 74770-970 | Extension Housing, 700R4/4L60E 2WD (CAST # 970) |
| 74747PC | Plate, 4L60E Valve Body (Stamped PC Or PY) |
| 74747-TC | 4L60E VALVEBODY PLATE STAMPED TC |
| 74747-1TC | 4L60E VALVEBODY PLATE STAMPED 1TC |
| 74747-ITC | 4L60E VALVEBODY PLATE STAMPED ITC |
| 74747-1TA | 4L60E VALVEBODY PLATE STAMPED 1TA |
| 74747-1TJ | 4L60E VALVEBODY PLATE STAMPED 1TJ |
| 74747-TA | 4L60E VALVEBODY PLATE STAMPED TA |
| 74747-ITA | 4L60E VALVEBODY PLATE STAMPED ITA |
| 74747-IHC | 4L60E VALVEBODY PLATE STAMPED 1HC |
| 74747-PX | 4L60E VALVEBODY PLATE STAMPED PX |
| GM-4L60E-GS | 4L60E GUT STACK |
| GM-4L65E-GS | 4L65E GUT STACK |
| GM-4L65E-GS-INC | 4L65E GUT STACK – MISSING INPUT DRUM |
| 4T60E | |
| 84740GE | Valve Body, 4T65E (Volvo)(4 Solenoids, 2 Square & 2 Round) 2003-Up (The EPC Solenoid Is 862”OD)(Uses A 1 Wire Manifold Pressure Switch) |
| 4T65E | |
| 84584 | Planet, 440-T4/4T65E Rear (Inner Splines Beveled on One End Only) 1983-Up |
| 84559B | Drum, 4T60E/4T65E Forward Band Drum (14 Roller Type Sprag) 1996-Up |
| 84582G | Planet, 4T65E Front W/12 Outer Lugs (No Bushing) 1997-Up |
| 84552GA | Drum, 4T65E 2nd Clutch (6 Clutch)(W/Deep Oil Groove Between Rings) 1997-Up |
| 84715DEK | Diff. Assy, 4T60E/4T65E (W/2.615”OD 42 Tooth Right Angle Sun Gear) .705”OD Pin (30 Tooth Pick-Up) W/Ring Gear 1997-Up |
| 6L45 | |
| 45740B | Valve Body, 4T60E (3 Solenoid) L1993-E94 (Cast #217 On Channel Plate)(The Primary 1-2 Accumulator Plug is Steel & Protrudes Out Past The Valve Body) |
| 6L80 | |
| 45740C | Valve Body, 6L80 (Without Solenoid Assembly)(7 Check Balls) 2006-13 |
| 45750D | 6L80E BELL HOUSING CAST #892 |
| 45500EK | 6L80 BELL & PUMP – CODE 033 OR CODE 034 |
| 45500DAK | 6L80 BELL & PUMP – CODE 121 OR CODE 892 |
| 6T70 | |
| 25500A | Pump Assembly, 6F50/6F55/6T70/6T75 (7 Vane) (Has No Hole In The Center Of The Top Cover) (Bushing Type) 2007-Up |
| 25500AA | Pump Assembly, 6F50/6F55/6T70/6T75 (7 Vane)(Has A .220”ID Hole In Center Of Top Cover) (Bearing Type) 2007-Up |
| 25420A | Solenoid Assembly, 6F50/6F55 (19 Pin Connector)(Cast # 7T4P-7Z369-AE) 2007-Up (No Chip) |
| 25420B | Solenoid Assembly, 6T70/6T75 (17 Pin Connector)(Metal Chip)(THESE ITEMS NEED TO BE VERIFIED BY THE VIN NUMBER!!) |
| 25586B | Planet, 6T70/6T75 Reaction (3 Gear)(Steel)(32 Teeth Pinions)(12 Lugs) 2007-Up (Cast # 29806-1262-02) |
| 25550A | Drum W/Shaft, 6F50/6F55 4-5-6 Clutch (6 Clutch)(12 11/16” Tall) 2007-Up (Aluminum) (Snap Ring Groove On Outer .235” From End) |
| 25550B | Drum W/Shaft, 6T70/6T75 4-5-6 Clutch (6 Clutch)(12 11/16” Tall) 2007-Some 2013 (Aluminum) (Snap Ring Groove On Outer .160” From End)(9 Holes In Bore) |
| 25550C | Drum W/Shaft, 6T70/6T75 4-5-6 Clutch (6 Clutch)(15 Holes In Bore) Some 2013-Up |
| 25759A | Rear Cover, 6F50/6F55/6T70/6T75 (10 Bolt)(Cast # RF8A8P-7B332-AA or 24236696 or 24258978)(.935”ID Sensor Hole) 2007-Up |
| 25759B | Rear Cover, 6F50/6F55/6T70/6T75 (10 Bolt)(Cast # RF8A8P-7B332-AA or 24236696 or 24258978)(.935”ID Sensor Hole) 2007-Up |
| 25583A-3 | 6F50 GEAR TRAIN 3 GEAR REACTION PLANET |
| 25583B-3 | 6T70 GEAR TRAIN – 3 PIN W/SHELL |
| 25583B-3NS | 6T70 GEAR TRAIN – 3-PIN w/OUT SHELL |
| 25583B-4 | 6T70 GEAR TRAIN – 4-PIN w/SHELL |
| 25583B-4NS | 6T70 GEAR TRAIN – 4-PIN w/OUT SHELL |
| 25624A | Sun Gear & Shell, 6F50/6F55/6T70/6T75 Reaction (34 Teeth)(2.135”OD Sun Gear)(36 Teeth Clutch Hub)(7 9/16”OD) 2007-Up |
| 25626A | Sun Gear & Shell, 6F50/6F55/6T70/6T75 Output (41 Teeth Sun Gear)(36 Teeth Clutch Hub) (6 3/4”OD)(16 Triangle Holes In OD) 2007-Up |
| 25584B-5 | 6T70-75 OUTPUT PLANET 5-PIN w/SHELL |
| 25584BK | 6T70 OUTPUT PLANET W/SUNGEAR AND SHELL |
| 25582B-4 | 6T70/75 INPUT PLANET 4-PIN |
| 25582B-5 | 6T70/75 INPUT PLANET 5-PIN |
| 25622A | 6T70-75 OUTPUT PLANET w/SHELL |
| 25644B | Diode, 6T70/6T75 Low/Reverse (10 Lug)(W/36 Teeth Clutch Hub)(1.750” Thick) 2007-Up |
| 25740B | Valve Body, 6T70/6T75 (Cast # RF7T4P-7A092-AC, 24223910 009)(Does Not Come With Solenoid Assembly) |
| 25740B-TCM | 6T70 VALVE BODY – W/ TCM |
| GM-6T70-GS | 6T70 GUT STACK |
| VT25 | |
| 205759AK | Rear Cover, VT25-E Drive Pulley (Aluminum, 4 Bolt) (Cast # 24223007/1) 2002-Up |
| HONDA | |
| HON-DS | HONDA DUAL SOLENOID |
| HON-SS | HONDA SINGLE SOLENOID |
| HYUNDAI | |
| 211740A | Valve Body, A6MF2 (8 Solenoid)(Cast # KN-3) 2010-Up |
| 41740A | Valve Body, F4A41/F4A42/W4A42 (5 Solenoids W/Plastic Snouts) 1996-10/04 |
| MERCEDES | |
| 722.9/722.6 | |
| 288740A | Valve Body Assembly, 722.9 (W/8 Solenoids)(10 Bolts To Case)(Cast # R220 277 14 01, & R220 277 08 01) 2004-Up |
| 288460A | Shift Motor, 722.9 (4 Bolts to Case)(5 Blade Connector)(Cast #5218) 2004-Up |
| MER-722.9-GS | 722.9 GUT STACK |
| 78740AA | 722.6 VALVE BODY (MERCEDES)(CAST # 04 06) |
| 78740AD | 722.6 VALVE BODY (6 SOLENOIDS)MERCEDES)(CAST# 0006) |
| 78740C | 722.6 VALVE BODY (CHYRSLER)(6 SOLENOIDS) |
| MITSUBISHI | |
| A4AF | |
| 42740LE | Valve Body, A4AF (4 Solenoid) Square Connector (Cast # V-6 #3 Filter Side) |
| 331500A | Pump, A8LR1 Complete 2011-Up (Stator & Pump Body W/ Gears) |
| 331740A | Valve Body, A8LR1 (9 Solenoids)(KD1 Cast) 2011-Up |
| MIT-R4A51-GS | R4A51 GUT STACK |
| NISSAN | |
| RE4R01A | |
| 73510AE | Pump Body, RE4R01A (With 2 lugs On Rotor) Fits Stator With .845”ID Front Bushing |
| 73740A | Valve Body, RE4R01A (5 Solenoids) With 3 Connectors |
| 73740AA | Valve Body, RE4R01A (5 Solenoids) With 4 Connectors |
| 73740AB | Valve Body, RE4R01A (1 Solenoid) 4 Cylinder Truck |
| NIS-RE4R01A-GS | RE4R01A GUTSTACK |
| RE4F04A | |
| 83740BA | Valve Body, RE4F04A/RE4F04V/4F20E (5 Solenoids, 1 On Opposite End) The 7 Wire Harness Is Made Into The Grommet That Seals Into Case, It Is A Pass Thru Wire Harness (Fits Altima 1993-99, Maxima 1992-99, Maxima SL 2004, Quest 1993-02, Quest S 2004-06, Quest SL 204, Infinity i30 1993-99, And Mercury Villager 1993-02) |
| RE4F04B | |
| 83740BC | Valve Body, RE4F04B (5 Solenoids, 1 On Opposite End) The 7 Wire Harness Unplugs From The Case Connector (Fits Altima 2000-06, Maxima 2000-03, Sentra SE-R 2.5L 2000-06, Infinity i30 2000-01, And Infinity i35 2002) |
| RE5R05A | |
| 173446C | Wire Harness, RE5R05A Internal (Black Plastic Circuit Board) With 1 Ten, 1 Nine & 1 Two Prong Connectors (With 7 Solenoid Connectors) Cast # 0260 550 002 On Solenoid Side (This Is The TCM Also) 2002-Up |
| 173520AA | Stator, RE5R05A Pump (Aluminum) With Bearing #209 Inside Rear Of Shaft (1.830”OD Where Sprag #646 Rides)(5 7/8” Long Stator Tube) 2002-Up |
| 173740AA | Valve Body, RE5R05A (2nd Design With 7 Solenoids)(With Two N/R Accumulators)(Has A Pressure Control Valve)(Does Not Come With TCM #446C Or Neutral Safety Switch # 410) 2002-Up |
| 173740AA-BAD | *BAD*Valve Body, RE5R05A (2nd Design With 7 Solenoids)(With Two N/R Accumulators)(Has A Pressure Control Valve)(Does Not Come With TCM #446C Or Neutral Safety Switch # 410) 2002-Up*BAD* |
| 173740AB | Valve Body, RE5R05A (3rd Design With 7 Solenoids)(With One Large N/R Accumulators)(Has A Pressure Control Valve)(Does Not Come With TCM #446C Or Neutral Safety Switch # 410) 2002-Up |
| 173740AB-BAD | *BAD*Valve Body, RE5R05A (3rd Design With 7 Solenoids)(With One Large N/R Accumulators)(Has A Pressure Control Valve)(Does Not Come With TCM #446C Or Neutral Safety Switch # 410) 2002-Up*BAD* |
| 173421AK | RE5R05A SOLENOID KIT |
| NIS-RE5R05A-GS | RE505A GUT STACK |
| RE7R01A | |
| RE7R01A | VALVE BODY |
| JF009E/RE0F08A | |
| 243705A | Pulley Half, RE0F08B (JF009E) Primary (Front)(7”Long) (6 1/32”OD)(1.258”OD) 2009-Up |
| 243708B | Pulley Half, RE0F08A/F08B (JF009E) Secondary (Rear)(10 1/16”Long) (6.195”OD)(35 Spline) 2007-Up |
| 243740A | Valve Body, RE0F08B (JF009E) (4 Solenoids)(1 Pressure Switch) (Stepper Motor)(1XA02 & 1XC On Filter Side) 2009-Up |
| 243759K-A | JF009E PULLEY SET A GRADE |
| 243759K-AB | JF009E PULLEY SET A GRADE – W/OUT REAR COVER |
| 299700A | Belt, RE0F08A/RE0F08B 2007-Up |
| JF010E/RE0F09A | |
| 203500A | Pump Assembly, RE0F09A/F09B (JF010E) (Cast # 6Y17 On Cover) 2003-Up |
| 203700A | Belt, RE0F09A/F09B (JF010E)(Nissan CVT) 2003-Up |
| 203706B | JF010E SECONDARY PULLEY 29T |
| 203705A | Primary Pulley Half, RE0F09A/F09B With Shaft (7 5/8”Long)(7”OD)(Front Half) 2003-Up |
| 203706A | Secondary Pulley Half, JF010E, RE0F09A/F09B (3.130”Thick)(7”OD)(Front Half) 2003-Up |
| 203740A | JF010 VALVE BODY GREEN PLUG |
| 203740B | Valve Body, RE0F09B (W/4 Solenoids)(Cast # 1XD01 On Solenoid Side, 1XE On Filter Side) 2007-14 |
| 203759 | JF010E REAR COVER CAST # EOA |
| 203759A | Rear Cover, RE0F09A/F09B (Aluminum)(18 Bolt)(Cast # AKO #1) 2003-Up |
| 203759AA | Rear Cover, RE0F09A/F09B (Alum)(18 Bolt)(Cast # ACO) 2003-Up (Has A Oil Feed Shaft W/2 Teflon Rings For The Secondary Pulley) |
| 203759B | JF010E REAR COVER CAST# YOA |
| 203759K-A | JF010E PULLEY SET A GRADE |
| 203759K-AC | JF010E PULLEY SET A GRADE – BAD |
| JF011E/RE0F010A | |
| 212708A | Secondary Pulley Half, RE0F10A (JF011E) (Nissan/Dodge) Rear Half (10” Tall) (6 1/2”OD) (10 Parking Lugs)(30 Splines) 2007-Up |
| 212708AB | Secondary Pulley Half, RE0F10A (JF011E) (Nissan/Dodge) Rear Half (10” Tall) (6 1/2”OD) (10 Parking Lugs)(29 Splines) 2007-Up |
| 212708B | Secondary Pulley Half, RE0F10A (JF011E) (Nissan/Dodge) Rear Half (10” Tall) (6 1/2”OD) (10 Parking Lugs)(24 Splines) 2007-Up |
| 212708AB-B | JF011E SECONDARY PULLEY B GRADE |
| 212708C | Secondary Pulley Half, RE0F10A (JF011E) (Nissan/Dodge) Rear Half (10” Tall) (6 1/2”OD) (10 Parking Lugs)(28 Splines) 2007-Up |
| 203414A | Sensor, RE0F09A/F09B Secondary Pressure (A-FPS A)(3 Prong Connector) (Also Fits RE0F09A Primary Pressure (FPS B) #415 Screws Into Case Inside Bottom Pan)(Also Fits RE0F10A (JF011E) Primary & Secondary Switch 2007-09) |
| 212425AK | JF011E SOLENOID KIT |
| 212414A | JF011E PRESSURE SWITCH |
| 212436A | Sensor, RE0F10A (JF011E) (Nissan/Dodge) Output Speed (3 Pin Oval Connector)(2.220”Tall) (.660”OD At O-Ring) 2007-Up |
| 212438A | Sensor, RE0F10A (JF011E) (Nissan/Dodge) Input Speed (In Case)(3 Pin Oval Connector) (2.910”Long) 2007-Up |
| 212444A | JF011E CVT VALVE BODY PLUG CONNECTOR |
| 212446A | Wire Harness, RE0F10A (JF011E) (Nissan/Dodge) Internal (4 Black – 2 Blade Connector, 2 Green – 3 Pin Connector, 1 Green – 6 Wire Connector, & Green 16 Pin Connector) 2007-Up |
| 212446B | Wire Harness, RE0F10A (JF011E) (Nissan/Dodge) Internal (22 Pin Case Connector, Green 16 Wire Connector, & Green 5 Wire Connector)(15 3/4” Long) 2007-Up |
| 212446BA | JF011E WIRING HARNESS (PINK GROUND) 2 SWITCH |
| 212500A | JF011E PUMP CAST# KA6X0623E9 |
| 212527A | Sprocket, RE0F10A (JF011E) (Nissan/Dodge) Pump Driven (31 Teeth)(.482”Thick) (.110” At Teeth)(2.375”OD)(.468”OD At Shaft) (14 Splines) 2007-Up |
| 212529A | JF011E CONVERTER REACTOR |
| 212554A | Drum, RE0F10A(JF011E) (Nissan/Dodge) Forward (3 Clutch)(30 Teeth)(24 Splines) (6 Bore Holes)(2.520”ID)(1.960”Thick) 2007-Up |
| 212587A | JF011E REVERSE PLANET |
| 212617A | Sungear, RE0F10A (JF011E) (Nissan/Dodge) Reverse Planet (82 Teeth Right Angle)(3.685”OD) (36 Teeth Clutch Hub) 2007-Up |
| 212670A | Shaft, RE0F10A (JF011E) (Nissan/Dodge) Input (6 3/4”Long)(20 Splines On End) (22 Splines Rear) 2007-Up |
| 212691A | Ratio Control Motor Follower, RE0F10A (JF011E)(Nissan/Dodge)(Aluminum)(2.745”Long) (.200”/.435”Thick At Forks) 2007-Up |
| 212700D | Belt, RE0F10A (JF011E) (Nissan/Dodge) 2007-Up |
| 212705A | Primary Pulley Half, RE0F10A (JF011E) (Nissan/Dodge) (7”Long)(6 3/4”OD)(38 Splines) (1.410”OD)(Right Hand Threads)(Front Half) 2007-Up |
| 212705AK | JF011E PRIMARY PULLEY |
| 212705BK | JF011E PRIMARY PULLEY TURNABLE “B GRADE” |
| 212715 | JF011E NISSAN DIFF 71 TOOTH RING GEAR 2WD |
| 212715A | JF011E NISSAN DIFF 71/47 TOOTH RING GEAR AWD |
| 212715B | JF011E CHRYSLER DIFF 71TOOTH RING GEAR AWD |
| 212730A | JF011E NISSAN PINION 20T/49T ONE GROOVE |
| 212730AB | JF011E CHRYSLER PINION 20T/50T NO GROOVE |
| 212730AC | JF011E PINION W/TRANSFER DRIVEN GEAR 22T PINION/49T TRANSFER |
| 212730AD | JF011E PINION W/TRANSFER DRIVEN GEAR 22T PINION/50T TRANSFER |
| 212740 | Valve Body, RE0F10A (JF011E) (Nissan/Dodge) 4 Solenoids (1 Pressure Switch) (W/Stepper Motor)(1XF00 1XF-L 1XF-U) 2007-Up |
| 212740A | JF011E VALVE BODY – TWO PRESSURE SWITCH |
| 212740A-PW | JF011E VALVE BODY. (PINK WIRE)(TWO SWITCH) DODGE |
| 212759B | Rear Cover, RE0F10A (Dodge) 19 Bolts To Case (Cast # AMX Z0A) (2 Mounting Bosses) 2007-Up |
| 212759C | Rear Cover, RE0F10A (Nissan) 19 Bolts To Case (Cast # FOB)(4 Mounting Bosses) 2007-Up |
| 212759CA | JF011E REAR COVER (CAST# CTR) |
| 212759CAK | Rear Cover W/ Pulley Assembly, RE0F10A (19 Bolt Rear Cover)(W/4 Threaded Bosses)(Cast #CTR)(With 29 Teeth Transfer Gear)(Includes #700, 705, 706, 707, 708, 710, 795) 2007-Up |
| 212707B | JF011E PRIMARY PULLEY REAR HALF B GRADE |
| 212759K-A | JF011E CVT PULLEY SET A GRADE |
| 212759K-AB | JF011E CVT PULLEY SET A GRADE – W/OUT REAR COVER |
| 212759K-AC | JF011E PULLEY – NON AIR CHECK |
| 212760A | JF011E INPUT SHAFT |
| 212760B | JF011E CVT AWD CASE 18 BOLT |
| 212760D | Case, RE0F10A (JF011E)(Dodge) (18 Pan Bolts)(4 Bolt Cooler)(1 Speed Senor) 2007-Up |
| 212843A | JF011E, CASE TO CONNECTOR CLIP |
| 212892B | JF011E, SNAP RING FWD DRUM TO RING GEAR |
| 212981A | Piston, RE0F10A (JF011E) (Nissan/Dodge) Primary Pulley (5.858”OD)(1.620”Tall)(1.575”ID) 2007-Up |
| 212981B | Piston, RE0F10A (JF011E) (Nissan/Dodge) Primary Pulley (5.858”OD)(1.620”Tall)(1.575”ID) 2007-Up WITH SPRING |
| 212DIFFG | JF011E DIFFERENTIAL GEAR |
| 212DIFFPIN | JF011E DIFFERENTIAL PIN |
| MPSNSTR1 | JF011E SENSOR |
| MPSTPMTR1 | JF011E STEP MOTOR |
| NIS-JF011E-GS | JF011E GUT STACK |
| JF015E/RE0F11A | |
| 323510A | Pump, RE0F11A(JF015E) (4 Bolt Cover)(Cast # On Pump Body CF2Y17E1F7) 2013-16 |
| 323510A | Pump Body, RE0F11A (JF015E) (3 Bolt)(Aluminum)(4 Bolt Cover) (Cast # CF2Y17E1F7) (1.100”ID Filter Neck Opening) 2013-16 |
| 323529A | Converter Reactor, RE0F11A (JF015E)(4 Bolt Aluminum Housing) (2.725” Tall) (30 Splines) 2013-16 |
| 323582AK | Converter Reactor, RE0F11A (JF015E)(4 Bolt Aluminum Housing) (2.725” Tall) (30 Splines) 2013-16 (PLANET KIT) |
| 323612A | JF015 FRONT PLANET SUNGEAR HUB 23T,36T |
| 323700A | Belt, RE0F11A (JF015E) Nissan CVT 2013-16 |
| 323705-B | Secondary Pulley Half, RE0F11A (JF015E)(Rear Half) (1.800”Thk)(5.650”OD)(3 ID Square Slots & 1 Round) 2013-16*BAD* |
| 323705A | Secondary Pulley Half, RE0F11A (JF015E)(Rear Half) (1.800”Thk)(5.650”OD)(3 ID Square Slots & 1 Round) 2013-16 |
| 323707-B | JF015E SECONDARY PULLEY – 29T*BAD* |
| 323707A | Secondary Pulley Half, RE0F11A (JF015E)(Front Half) (4 3/8” Long)(5.415”OD)(20 ID Splines) (1.175”OD Threads) 2013-16 |
| 323715 | JF015E DIFFERENTIAL W/RINGGEAR 66 TOOTH |
| 323730A | JF015E PINION(17-T) 34 SPLINE PARK (30 SPLINE ON END) |
| 323740A | Valve Body, RE0F11A (JF015E) (5 Solenoids)(2 Sensors) (11 Bolts To Case)(Cast # APZ) (20 Bolts Hold Together) 2013-16 |
| 323740A-NEW | JF015E VALVE BODY NEW OPEN SOLENOID |
| 323740AB | JF015E CVT VALVE BODY – CLOSED SOLENOIDS |
| 323750A | Bell Housing, RE0F11A(JF015E)(19 Bolts To Case)(9 3/8” Top Bolts)(2:30 Starter, Closed) (Cast # APF#2AXM) 2013-16 |
| 323759A | Bell Housing, RE0F11A(JF015E)(19 Bolts To Case)(9 3/8” Top Bolts)(2:30 Starter, Closed) (Cast # APF#2AXM) 2013-16 |
| 323759 | JF015E APY CAST CODE |
| 323759A | Rear Cover, RE0F11A (JF015E) (Aluminium)(11 Bolts)(2 Sensors) (3 Mount Bosses) (Cast # APZ AMX)(2 Retainer Holes) 2013-16 |
| 323759AB | JF015E REAR COVER – CAST# X421A |
| 323759AC | JF015E REAR COVER – CAST# GAC APY |
| 323759AD | JF015E REAR COVER – CAST# APZ |
| 323759B | JF015E REAR COVER – NO CODE |
| 323759K-A | JF015E CVT PULLEY SET A |
| 323760A | Case, RE0F11A (JF015E)(Cast # APO)(19 Bolts To Case) (15 Pan Bolts)(X427A Stamped) (2.205”OD Axle Seal) 2013-16 |
| 323800A | Gear, RE0F11A (JF015E) Counter Drive (32 Teeth, Left Angle) (3 Grooves)(.845”Thick) (2.910”OD)(18 Splines) 2013-16 |
| 323759K-AB | JF015E PULLEY SET W/O COVER |
| 323759K-BAD | JF015E PULLEY SET*BAD* |
| 343759K-BAD | JF017E PULLEY BAD BELTS |
| 333759K-BAD | JF016E PULLEY BAD BELTS |
| JF016E/RE0F010D | |
| 333759A | Rear Cover, RE0F10A (JF0116E) (19 Bolts To Case) (Cast # 28XOA)(2 Bolt Park Assembly) (3 Mount Bosses 6 Holes & Speed Senor Hole) 2013-Up |
| 333700A | Belt, JF016E (RE0F10D) (CVT8) 2014-Up |
| 333705A | Primary Pulley Half, RE0F10D (JF016E) (7 1/2”Tall)(Front) (6 3/4”OD)(38 Splines)(1.215”OD) 2013-Up |
| 333705B | JF016E PRIMARY PULLEY TURNABLE |
| 333708 | Secondary Pulley Half, RE0F10D (JF016E) (10”Long)(6 3/4”OD) (Rear Half)(26 Splines) 2013-Up |
| 333708A | Secondary Pulley Half, RE0F10D (JF016E) (10”Long)(6 3/4”OD) (Rear Half)(30 Splines) 2013-Up |
| 333708B | Secondary Pulley Half, RE0F10D (JF016E) (10”Long)(6 3/4”OD) (Rear Half)(27 Splines) 2013-Up |
| 333708C | Secondary Pulley Half, RE0F10D (JF016E) (10”Long)(6 3/4”OD) (Rear Half)(29 Splines) 2013-Up |
| 333708D | JF016E SECONDARY PULLY 24-T |
| 333740A | Valve Body, RE0F10D (JF016E) (5 Solenoids, 2 Pressure Switches)(ARO M2B Cast #) 2013-Up |
| 333740A-BAD | *BAD*Valve Body, RE0F10D (JF016E) (5 Solenoids, 2 Pressure Switches)(ARO M2B Cast #) 2013-Up*BAD* |
| 333759K-A | JF016E CVT PULLEY SET GRADE A |
| 333759K-AB | JF016E CVT PULLEY SET GRADE A – W/OUT REAR COVER |
| 333759K-AC | JF016E CVT PULLEY SET GRADE A – BAD |
| JF017E/RE0F010E | |
| 333740B | JF017E VALVE BODY – GRAY & BLACK SWITCHES |
| 343700A | Chain, RE0F10E (75 Pins) (1.235”Long)(1.010” Between Pins Wide) 2013-Up (JF017E) |
| 343705A | JF017E PRIMARY PULLEY |
| 343705BK | JF017E PRIMARY PULLEY TURNABLE |
| 343705AK | JF017E PRIMARY PULLEY |
| 343708AK | JFO17E SECONDARY PULLEY ASSY 25T,1ID GROOVE |
| 343708BK | JFO17E SECONDARY PULLEY ASSY. 26T, 3ID GROOVE |
| 343708CK | JFO17E SECONDARY PULLEY ASSY. 28T, 2ID GROOVE |
| 343759K-A | JF017E CVT PULLEY SET GRADE A |
| 343759K-AB | JF017 PULLEY KIT A GRADE W/COVER |
| 343905BK | PRIMARY PULLEY B GRADE |
| MISC-CVT-COOLER | MISC OIL COOLERS |
| MISC-CVT-PUMP | MISC JF SERIES OIL PUMP |
| SATURN | |
| 343760A | JF017E CASE |
| 10740B | Valve Body, Saturn 3rd Design 1994-Up (With Plastic End On Manual Valve) 1992-02 (Complete Valve Body, Fully Tested, Ready To Install) Has Sonnax Part # S10741P-1AK And S10741P-2K Installed |
| SUBARU | |
| 255715B | Differential Assembly, TF-80SC/TF81SC (W/53 Teeth Ring Gear)(7 1/2” Tall)(AWD) 2005-Up |
| 217740A | AW55-50 VALVE BODY NO CODE CAST #9165 |
| 217740AA | AW55-50 VALVE BODY B CODE |
| 23740EA | Valve Body, EC8 (7 Solenoids) (Cast # 214087) 1999-Up (Uses 7 Solenoids, But Has An Extra Solenoid Hole, But Has No Solenoid In It) |
| TR580VB | TR580 VALVE BODY |
| TR690VB | TR690 VALVE BODY |
| TOYOTA | |
| K313 | |
| K313P | K313 PULLEY |
| K313VB | K313 VALVE BODY |
| K313PUMP | K313 PUMP |
| K313FWD | K313 FORWARD DRUM AND PLANET |
| A340E | |
| 97500 | A340E PUMP – MIXED |
| 97740A | Valve Body, A340 (3 Solenoid) Uses 1 Tube To Case |
| 97740BA | Valve Body, A340 (3 Solenoid) (No Tubes To Case) (With Cable Operated Throttle Valve) (Cast # 8938) |
| 97740CC | Valve Body, A340 (4 Solenoid) (No Tubes To Case) (With Solenoid Operated Throttle Valve) (Has An Accumulator That Looks Like A Solenoid With No Connector) (Cast # 8938) |
| A750F | |
| 117740A | A750 VALVE BODY (7 SOLENOID) (CAST # 84010) |
| TOY-A750F-GS | A750F GUT STACK |
| A761F | |
| 117740B | Valve Body, A761 With 9 Solenoids (Cast # 8870) 2004-Up |
| AB60E | |
| 117740BA | Valve Body, AB60E/AB60F W/9 Solenoids (Cast # 89010) 2007-Up |
| TOY-AB60-GS | AB60E GUT STACK |
| U140E | |
| 167500 | U140/241/151/250 PUMP |
| 167740A | Valve Body, U140/U240/U241 (5 Solenoid)(Uses 2 Rubber Boot Seals To Case) 1999-05 |
| 167740AA-1 | Valve Body, U140/U240/U241 (5 Solenoid)(Uses 3 Rubber Boot Seals To Case) 2006-12 |
| 167583A | Planet Kit, U140/U240/U241/U250 (With 3 Gear Output Or Front Planet) 1999-Up (Contains: #594/577/584/247/614/237/238/239/582/575)(The 575 Hub Height Is 1.991” Tall) |
| U241E | |
| 167740AA | Valve Body, U140 (5 Solenoid)(With 3 Rubber Boot Seals To Case) 1999-05 |
| U250E | |
| 167740E | Valve Body, U150/U151/U250 (7 Solenoid)(4 Solenoids Are .840”OD, 3 Are .945”OD) (With 3 Accumulator Towers On Case Side) 2001-Up |
| 167740EA | U150 LARGE SOLENOID VALVE BODY |
| U340E | |
| 127740B | Valve Body, U340E/U341E/U341F (5 Solenoids)(EPC Solenoid Is 0.840”OD) 1999-Up |
| U341E | |
| 127740A | Valve Body, U340E/U341E/U341F (5 Solenoids)(EPC Solenoid Is 1.108”OD) 1999-Up |
| U760E | |
| 277740B | Valve Body, U760E (W/7 Solenoids)(Cast # 80030) 2007-Up |
| 277555B | Drum, U760E Forward/Direct Clutch W/Shaft (9 1/4” Long)(3 Forward Clutch & 2 Direct Clutch) 2008-Up |
| 277759B | Rear Cover, U760E (Aluminum)(14 Bolt, W/4 Extra Holes)(Cast # U7) 2007-Up |
| VW | |
| 01M | |
| 75740AA | Valve Body, 095/096/097/098 (01M/01N/01P)(With Round Filter Hole)(Must Go By Date On Main Valve Body Section) 1997-98 (Fully Tested With All Necessary Sonnax Replacement Valves) |
| 75740AA | Valve
Body, 095/096/097/098 (01M/01N/01P)(With Round Filter Hole)(Must Go By Date
On Main Valve Body Section) 1997-98 (Fully Tested With All Necessary Sonnax Replacement Valves) |
| VW-01M-GS | 01M GUTSTACK |
| 02E | |
| 02E-VB | 02E VALVE BODY |
| 02E-CP | 02E CLUTCH PACK |
| 09A | |
| 183740A | Valve Body, JF506E (Freelander/VW) With 2 Tubes (All Stamped Steel Solenoid Brackets) 2002-Up (WIT Rebuilt)(Customer Must Use His Manual Valve) |
| 09G | |
| 265740AC | Valve Body, 09G (W/No Pressure Switches)(Oil Cooler Is On Transmission Case) 7/2004-Up |
| VW-09G-GS | 09G GUTSTACK |
| 09M | |
| 265740AA | Valve Body, 09G (W/2 Pressure Switches)(Oil Cooler Is On Transmission Case) 2003-6/2004 |
| 265740AE | 09M VALVE BODY |
| ZF | |
| ZF-5HP19-GS | 5HP19 GUT STACK |
| 175740B | Valve Body, ZF5HP19 (BMW) (7 Solenoids, 1 Yellow, 3 Green & 3 Black)(Uses 2 Large Tubes #540-7 Valve Body To Stator) 1994-Up |
| 8HP70-VB | 8HP70 VALVE BODY |
| ZF-8HP70-GS | 8HP70 GUTSTACK |
| 142740A | Valve Body, R4/V4A51 (5 Solenoids) (Cast # 991228) 1999-02 |
| MISC. CVT PALLET | PALLETS OF CVT STUFF |
| NIS-JF011E-TF | JF011E TRANSFER CASE |
Hard Parts
Copyright © 2025 Mid-Mountain Auto Supply — Primer WordPress theme by GoDaddy